|
|
LNA for the APT signals receiver
Žúrek, Dan ; Urbanec, Tomáš (referee) ; Baran, Ondřej (advisor)
This bachelor thesis is dealing with design, realization and optimization of the LNA (Lownoise amplifier) for receiving of APT signals from the NOAA weather satellites in 137 MHz – 138 MHz frequency band. The first part of this work is aimed on critical parameters of the amplifier and the filter circuits especially on a noise figure and a high selectivity. The next part of this project is about the particular concept and simulation of LNA by using the Ansoft Designer software. The printed circuit board is realized in the Cadsoft Eagle. The final part of this bachelor thesis is dealing with a production of such amplifier together with its measurement and testing in a real operation of receiving APT signals.
|
|
|
Application possibilities of LNVGA programmable amplifier
Sobotka, Josef ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the theoretical description of the qualitative characteristics and parameters of some modern active elements, also discusses the theory of signal flow graphs at the level applicable for the following frequency filter design methods. The thesis is also generally discussed the issue with the circuit simulator PSpice modeling theory and voltage amplifiers on the basic 6-levels. The practical part of the work is divided into two parts. The first practical part is dedicated to design four levels of simulation model of components LNVGA element. The second practical part contains detailed theoretical proposals for three circuit structures implementing the frequency filters 2nd order (based on the basic structure of the OTA-C) using signal flow graphs with configuration options of Q and fm based on the parameters of active elements in the peripheral structure and their verification with prepared LNVGA model layers.
|
|
|
L-band receiver front-end
Kolář, Jan ; Špaček, Jiří (referee) ; Kasal, Miroslav (advisor)
This Master's Thesis deals with a design of L-band receiver front-end. In the concrete the receiver is designed for receiving signals of frequency band 1,3 GHz. All particular blocks from low noise amplifier to intermediate frequency amplifier and frequency doubler in LO input are described, designed and simulated in program Ansoft. The part of this Master's Thesis is aimed to construct a working front-end receiver and to measure its basic parameters.
|
|
|
GPS Two-Stage Low Noise Amplifier
Šindler, Pavel ; Kasal, Miroslav (referee) ; Baran, Ondřej (advisor)
This work deals with a design of a low noise amplifier for the GPS band. The first part shortly describes properties of GPS signals and possible jamming sources. In the next chapter, basic parameters of low noise amplifiers, ways of the amplifier stability determination and stabilization are described. A summary of methods of a narrowband amplifier design follows. The next chapter contains a short description of filters usable in the designed amplifier. The next part deals with the design of the two-stage low noise amplifier with the help of Ansoft Designer software. The following part deals with the amplifier realization and its parameters measuring. At the end of this work, some experience with GPS signals reception with the realized low noise amplifier, a passive antenna and two different types of GPS receivers are mentioned.
|
|
|
Low-noise S-band amplifier
Potěšil, Dušan ; Vágner, Petr (referee) ; Kasal, Miroslav (advisor)
This work deals with design, simulation and realisation of a receiving systém of an S-band front end for satellite communication. The first part of the project is designed the low noise amplifier (LNA) with high associated gain. The basic point of the design is choice of the active device. In the present time are available the ultra low noise transistors based on the GaAs with high mobility electron. The two-stage LNA has been designed with Agilent ATF-55143. It is pseudomorphic HEMTs ,which work in an enhancement mode.These transistor do not require a negative bias voltage and have extremely good typical noise figure. The design includes an interdigital tuned band pass filter between stages. The second part of the project is search another way design circuit. There are designed two LNA with paralel coupled line filter. The first has been applied on a PTFE substrate Duroid 5880 with relative permitivity 2,2 and tg d = 0,009. The substrate FR-4 (r = 4.34) with the thickness 0.06” was used for the realization.
|
|
|
Low Noise amplifier for 8,4 GHz
Svoboda, Libor ; Vágner, Petr (referee) ; Kasal, Miroslav (advisor)
This project deals with methods of design and realization of low noise microwave amplifier for X-band. The first part describes this issue at a theoretical level. Thus it contains a detailed analysis of microstrip line and its circuit components. It is followed by some specifics of microstrip filters and with mention of microwave heterojunction transistors. The last chapter of the theoretical part describes design of small-signal amplifier with focus on low noise figure. The second part, practical, shows a concrete procedure of two-stage LNA design with HEMTs, using CAD tool Ansoft Designer. This section, as well as the bachelor’s thesis, is finished with realization of amplifier and analysis of its properties.
|
|
|
Antenna a LNA for multiband GNSS receiver
Ondráš, Michal ; Baran, Ondřej (referee) ; Záplata, Filip (advisor)
This project describesa microwave antenna for GNSS and low noise amplifier. Mikrostrip antenna is a modern type of antenna. This mikrostrip antenna is Dual – band antenna with circual polarization. The thesis describes how to make anantenna, what a circular polarization is, whata patch antenna is and what GNSS is. Low noise amplifier amplifies the antenna output signal.
|
|
| |
|
|
Low Noise Amplifiers for frequency range 1-3 GHz
Klegová, Hana ; Zamazal, Michal (referee) ; Kasal, Miroslav (advisor)
This masters thesis deals with low noise amplifier design for frequency range 1 GHz - 3 GHz. There is a short theoretical introduction in the first part of the thesis. There are described parameters and properties of transistors and general two-ports. Description of the noise characteristics two-ports follows. The next capture contains design of two-stage amplifiers. One of them is with a microstrip filter between stages and the second one is with combline filter on input of the amplifier. The amplifiers and the microstrip filter were designed in program ANSOFT Designer. The design of combline filter was realised in program CST Microwave Studio. Both amplifiers ware made and their properties ware compared with simulations.
|
|
|
LNA for Amateur Radio Bands
Děcký, Miroslav ; Pospíšil, Martin (referee) ; Povalač, Aleš (advisor)
The thesis deals with a draft and inclusion of a low noise preamplifier – LNA in a signal route of a radioamateur stage. It also deals with measuring, comparing and subsequently choosing suitable relays for HF application. For the resulting LNA system are designed bandpass filters and also sequencer for correct and safe timing.
|
guest ::
